Product overview
N8UE1+2/8 Type 1+2 AC Surge Protection Device
The N8UE1+2/8 is a Type 1+2 AC surge protection device for low-voltage distribution. As a DIN rail surge protection device, it should be matched to the published system voltage, discharge ratings and protection mode before the configuration-specific document set is requested.
Published parameters
Technical data
These values are copied from the published product page. Use the table to compare this surge protective device with the project system, protective coordination, installation environment and destination-market requirements before ordering.
| Item | Published parameter |
|---|---|
| Product and electrical ratings | |
| Model NO. | N8UE1+2/8 |
| SPD Type | Type 1+2 |
| Protection Mode | Standard: L1/2/3/N-PE; NPE: L1/2/3-N, N–PE |
| Maximum Continuous Operating Voltage (AC) Uc | 275 V AC |
| Frequency | 50/60 Hz |
| Nominal Discharge Current In (8/20 μs) | 20 kA |
| Maximum Discharge Current Imax (8/20 μs) | 50 kA |
| Impulse / composite-wave rating | Standard: 7 kA; NPE: 25 kA |
| Voltage Protection Level Up | Standard: 1.5 kV; NPE: 1.8 kV |
| Response Time tA | Standard: ≤25 ns; NPE: ≤100 ns |
| Installation | |
| Back-Up Fuse (max) | 125 A gL/gG |
| Terminal cable range | 1.5 mm²–25 mm² / 1.5 mm²–35 mm² |
| Degree of Protection | IP20 |
| Mounting | 35 mm guide rail |
| Housing material | UL 94 V-0 |
| Mechanical and environmental | |
| Dimensions | 1P: 82±1 × 18±1 × 66±1 mm 2P: 82±1 × 36±1 × 66±1 mm 3P: 82±1 × 54±1 × 66±1 mm 4P: 82±1 × 72±1 × 66±1 mm |
| Operating Temperature Range | -40 °C to +85 °C |
| Permissible Operating Humidity | 5% to 95% |
| Atmospheric pressure and altitude | -500 m to +5000 m |
Project screening
Review the model before quotation
The model number alone is not enough to confirm suitability. Use these four checks with the published table and drawings when reviewing this surge protective device.
- System voltage and protection modeConfirm that the AC system matches the published 275 V AC maximum continuous operating voltage and the intended protection mode.
- Discharge coordinationSelect standard or NPE protection mode before comparing the impulse current, Up and response time. The published values differ by variant, so the exact configuration must remain visible in the quotation and report request.
- Pole arrangementChoose 1P–4P only after confirming phase, neutral, panel width, wiring route and enclosure space for the N8UE1+2/8 configuration.
- Installation environmentReview the 35 mm guide rail, IP20 indoor use, conductor range, temperature, humidity and altitude limits.
Certification scope, model-specific reports, price, MOQ, lead time and customization availability require quotation confirmation.
Original product media
Engineering drawings
The native schematic, outline dimensions and wiring diagram remain the reference drawings for installation review. Open each sheet at full size.



Supplier evidence
Qualifications & OEM/ODM
About Us and Quality Control provide company-level supplier evidence. They do not replace configuration-specific certificates or test reports for the N8UE1+2/8.
Product design and sample validation
Company-level product planning and validation context from About Us. Sample review and engineering evidence support the supplier overview.
ISO 9001
Company quality-system material; not model-specific certification.
N8UE1+2 test report
Confirm the selected N8UE1+2/8 configuration and report scope.


Assembly and process control
Supplier-level production and quality evidence, not a model performance claim. Includes assembly and quality review context.
OEM/ODM review. ONESPD publishes company-level product-range support. For this model, confirm logo, labeling, packaging and document requirements with the supplier before ordering.
Documents and enquiry
Request the file set for the selected configuration
Use the site’s real support routes for the catalog, selection guide, certificates, reports and project enquiry. Preview material is not treated as a formal model document.

Before requesting documents, confirm the pole arrangement, destination market and intended installation.
- Technical data and selectionRequest the published ratings, installation limits and the exact pole configuration.
- Engineering drawingsInclude the schematic, outline dimensions and wiring reference required for review.
- Compliance and quotation scopeConfirm certificate or report coverage, quantity, target market, labeling and packaging requirements.
Configuration review
Share system voltage, phase arrangement, pole count and installation environment.
Document request
Ask for the technical sheet, report scope and destination-market documents.
OEM/ODM brief
Include label, packaging, quantity and selected configuration requirements.
Quotation enquiry
Use Contact Us to confirm the exact configuration before ordering.
Project enquiry
Need a document pack or configuration quote?
Send the system details, quantity, target market and certificate requirements. The final N8UE1+2/8 scope remains subject to supplier confirmation.
Buyer FAQ
Frequently asked questions
Is the N8UE1+2/8 intended for indoor installation?
The published degree of protection is IP20. Confirm the final enclosure, installation location and environmental requirements before ordering.
How should the pole configuration be selected?
The published range covers 1P–4P configurations. Selection depends on the phase and neutral arrangement, protection mode and available panel width.
Which documents should be requested for this surge protective device?
Request the certificate scope, model-specific report, technical sheet and destination-market documents required for the configuration included in the quotation.




